Profile Photo
Jaime Carreon
97 articles

North American T-2C Buckeye Special Hobby 1/48

July 10, 2016 · in Aviation · · 15 · 2K

The T-2 was the US Navy's intermediate trainer, used to introduce pilots to jets after basic training in piston engine aircraft. It was intended as a straight wing follow on to the T-28, entering service in 1959, and serving until replaced by the T-45 in 2008. The A models were single engine, later giving way to the more familiar twin engine B and C models. They were built in the North American assembly plant in Columbus, Ohio, thus the name "Buckeye."

This is the kit, which was mixed media, including plastic and resin parts. It came to me partially assembled - I cleaned up a few seams and blemishes, did the painting, decals and final assembly, a process which was filled with many hours searching for missing parts! An email to Special Hobby resulted in delivery of some of the parts I needed within a few weeks of my request - great customer service.

Decals are from Two Bobs and are absolutely amazing, going on easily with a bit of future and micro sol. Paint was from Model Master, with some light weathering and a fairly heavy application of clear flat to simulate sun fading. The model represents an airplane assigned to VT-23, based in Kingsville, Texas in the mid 1980's.

I now know why all us old geezers are building old kits - the main gear struts were five pieces each! The inboard main gear door actuators are not installed, since they were flashed over resin and trying to clean them up resulted in their destruction, as they were about the diameter of human hair. The canopy had been masked over for quite some time, so removing all of that and the goo left over took up the better part of several hours. Some of the clear parts were microscopic, and the the nose and tail pitot tubes (also microscopic) were both lost to the carpet monster. There truly is a fine line between hobby and insanity...

Thanks, Jack!

Reader reactions:
6  Awesome

6 additional images. Click to enlarge.


15 responses

  1. Great job, nice subject, I agree,newer kits can be fiddly.

  2. Well...it still came out lookin' pretty good to me. AND...now I know where it got it's name (thanks) - nice "save", by the way, too.

  3. Jamie,
    This is more than a build it is a restoration. You have done an excellent piece of work here. This is beautiful.

  4. Sharp looking finishes, Jamie. A great recovery effort.

  5. Jaime, your build and resolve to succeed has paid off, this turned out very nice. No question, this is an outstanding looking model. Well done !

  6. Profile Photo
    P.k said on July 11, 2016

    Like hard build kit

  7. It really came out nice Jaime….you can send it back now…LOL

  8. Looks great Jaime! I've got a couple of "old" T-2's, one a matchbox and one a rebox by revell, and a set of TwoBobs decals just waiting for them! I'm going to PM you about a color question...

  9. Great save and terrific results, Jaime. I've built a bunch of Special Hobby kits and they can be a bear. Resin parts usually the Achilles Heel-either fit poorly or castings are porous and surrounded by flash. BUT, sometimes they're the only game in town, which is how I sold myself on SH.

  10. Thanks, everyone! This project had its moments, but it's a seldom seen subject and does add a nice splash of color to my small collection.

  11. Jaime, that sure is a pretty looking jet. Nice job

  12. Very neatly turned out, Jaime, these Navy schemes always look the business and this one is exceptionally attractive.

  13. Very nice! Great paint job & an excellent "save" of an interesting aircraft.

Leave a Reply