Profile Photo
bob mack
59 articles

Revell 1/24 1969 Dodge (Coronet) Superbee 440 six pack

July 11, 2018 · in Automotive · · 39 · 3.4K

looks like a Charger and a Roadrunner had a baby

I jacked the rear end about 3/16th

my first car...at least first shiny thing

the hood could be released by pulling the pins ...then the driver stands in front and lifts the fiberglass hood off by himself

Chrysler said he would put every American high school boy to work to get one cheap

you could get a Roadrunner with 3 on the floor for $2,300.00 in "69"

the 440 six pack cost $400.00 as an option the HEMI cost $800.00...there was 1 horse difference between them...they were equal powerplants ...the HEMI more rare ran two four barrels and is more desired

the 6 pack was three individual two barrels in tandem that had to be insync a pain

we used to carry matchbooks to set the points in an emergency

the color is sublime green...the heater hoses are 14 gauge 110 as is brake line ...sparks were wired

blub blub blub blup...oh that engine

Reader reactions:
6  Awesome

39 responses

  1. Nicely done Bob, brings back a lot of memories. Those cars could go really fast in a straight line, too bad the brakes and suspension couldn't keep up with the rest of the car. Did a nice job for your first shiny thing. I like it.

  2. Beautiful car Bob, a delight to look at. Well done and thanks for sharing the blub blub too! I can imagine what it sounds like for real...

    • thank you Mike...the three greatest sounds in the world to me are a Rolls Royce Merlin a Harley Davidson and those high compression big blocks

  3. Loved those Mopar muscle cars...always wanted a Superbird (or Daytona) personally. Never did have one (or even drive one) - prices are ridiculous nowadays. 🙁

    • I had a feeling you were a Mopar man...the Superbird and Daytona were killing everything on the track so Nascar told Chrysler you have to put at least one in each of your dealerships to compete as a stock car...six months into 1970 1/3 of the dealerships still had them on the lot...nobody wanted one...now they go for a quarter million and up

  4. Yes, finally some Detroit Muscle! You did this one justice...hot wheels! Love the Paint job and the color. Love the Steel rims with caps. My favorite look. Great Job with the Motor and interior. Very impressive. It would look great side-by-side with my Camaro ZR-1.

    3 attached images. Click to enlarge.

  5. Great job! Go Mopar! Love the red line tires.

  6. Nice to see a muscle car write up. Really nice work on this build.

  7. A nice stand-out icon!

  8. Profile Photo
    said on July 12, 2018

    Great looking build. V8s rule. My old firebird was like a battleship broadside firing up every morning running just cherry bombs as silencers. Some great sounding sixties and seventies mopars and muscle cars to be found on youtube just type in anything like muscle car sound or growl . Nothing comes close to the character of American muscle be it sound or drive. Silly grin machines. That's what I had on my face every time I drove one. ? Great stuff Bob.

    • Profile Photo
      said on July 12, 2018

      I also had a Duster. I love Mopar.

      • thank you Tony... I was a big fan of the 68 Firebird...love the Duster and Dart too...heck i even loved the Valiant which the Duster came out of...fine looking car

      • I recently restored a 1973 Plymouth Duster. It was a 340 car with a 4 speed. Quite fun to drive. I'm a "Mopar" guy too... Here's a photo of it on my rotisserie...


        The inside of the trunk as I was getting closer...

        The underneath was just as nice as the top side.

        On the trailer to get the front end alignment done...

        and the finished product.

        The 1970-72 were my favorite years however.
        Enjoy.

        • that is one hot rotisserie restoration...those AMD body panels are a God send

          • Profile Photo
            said on July 12, 2018

            Very nice job on that Louis. Cool.

          • Thanks guys for the compliments...

            Believe it or not, this yellow Duster was a almost a rust free car. It came from California. The windshield leaked and this caused some tiny pin holes in the floor pan. Since AMD started making a complete one piece factory correct floor for the A body cars, I decided to get one and replace it. Other than that the rest of the sheet metal is the original stuff. Here's a picture of the Duster right after I blasted it down to bare metal. No primer or any type of paint has been sprayed on here yet. It's just plain old Detroit steel...


            Here's a pile of AMD sheet metal for the 73 Challenger, which is the car I'm currently restoring... they package it very good for shipping.

            This has all been installed on the 73 Challenger now. Here the parts are laid out for inventory.


            I built a frame rail jig to keep everything lined up as I spot welded it back together.

            Here I'm test fitting the new AMD trunk floor. This stuff fits very good...

            I have a Miller spot welder with a timer on it, so I can duplicate the factory spot welds.

  9. What a wonderful build... being a fellow "Mopar Gear Head", this one brought back many memories for me too.

    Many years ago I owned one of these, but mine had the 383 HP engine and a 4 speed. Tom hit on something too about the brakes. The car had wheel "Heavy Duty" 11 inch manual DRUM brakes and wouldn't stop too well after several high speed stops. The brakes would simply fade away. My Super Bee didn't have anything power assisted. It was manual steering, manual brakes, manual transmission, and no air conditioning.

    My car was also green, but the darker metallic green called "Dark Green Iridescent" which was a new color they introduced in the Spring of 1970. My car originally had the points ignition you mentioned. The car ran it's fastest with the points set at .016" and the dwell set at 30 degrees. I got tired of messing with the points every so often and swapped it over to a "Direct Connection" electronic ignition distributor with a "Chrome" race ignition box.

    I sold this Super Bee and bought a 1969 Plymouth Road Runner that was also a 383 car, but the color was a very bright "B-5" Blue.

    I wish I still had both of these cars... Those were the days.

    Now I have two old Dodge Challengers, (and a new 2017 Challenger T/A with the new Hemi). One is a 1970 "Lime Green" car just like the color of your model, and the other is a 1973 Challenger Rally that will be red once I'm done with the restoration.

    I really love these old Mopars and it is very nice to see one build up in a smaller version...

    Thanks for the trip down memory lane.
    Here's a few pictures for you that I took at the Mecum Auction in Kissimmee FL a few years ago.

    The first two are show a "Butterscotch" Super Bee with the lift off hood...



    and the next two pictures are of the Plymouth Road Runner version also with the fiberglass lift off hood and a 440 "Six Barrel" as Plymouth called it...
    The first one is B-5 Blue the same color as my 69 Road Runner...

    and the last one is the same bright red color that I'm painting my 73 Challenger with.

    Thanks again ! Hope you enjoy the pictures... 🙂

    • man talk about a trip down memory lane… I had a 69 Roadrunner F8 ivy green 383 727 auto on the floor black interior…built in California…man i really enjoyed your post...is the red torrid red

      • Yes that's the color. I think it was called "E-5 Bright Red" or "Tor-red" depending on if it was a Dodge or a Plymouth...

        My "B-5 Blue" Road Runner had a blue metallic interior, with a console shifted 727. It also had air conditioning. power disc brakes and power steering. It was the high end model of the Road Runner and even had the fake wood grain on the dash and console. It was almost a GTX... but it didn't have the 440 under the hood. Too bad.

        Sounds like your 69 Road Runner was a beautiful car...

        and I really enjoyed your Super Bee model too ... 🙂

  10. Outstanding, Bob! This model and the photos have brought back a LOT of old, great memories!

  11. Great job on the Super Bee...even if it is a Mopar. ?

  12. Bob, nice build of a forgotten classic. I remember talking with State troopers from that era who drove Fury's with 440's, They all said the same thing, the car could go over 140 mph and when you did get it up over 100 mph you could actually watch your gas gauge move. Impressive when you think of how much Pittsburgh steel it was pushing !

Leave a Reply