Profile Photo
Tom Cleaver
908 articles

ProModeler (Monogram) 1/48 F-84G Thunderjet

March 8, 2019 · in Aviation · · 16 · 3.9K

The second Air Force jet fighter ordered into development, the was designed by Alexander Kartveli, who had created the P-47 Thunderbolt. After attempting a turbojet-powered replacement for the P-47, Kartveli and his team designed a new aircraft with a streamlined fuselage using an axial compressor turbojet, with fuel carried in thick unswept wings. After meeting with Kartveli, the USAAF released General Operational Requirements on September 11, 1944, for a day fighter with a top speed of 600 mph (521 kn, 966 km/h), combat radius of 705 miles (612 nmi, 1,135 km), and armament of either six 0.50 in (12.7 mm) or four 0.60 in (15.2 mm) machine guns, to be powered by the General Electric TG-180 axial turbojet, which entered production as the Allison J35.

The Air Force ordered three prototypes of the new XP-84 on November 11, 1944. Because the design promised performance superior to the Lockheed XP-80, and due to 's extensive experience in producing the P-47, there was no competition for the contract. Republic chose the emotive name “,” to continue the tradition begun with the P-47 Thunderbolt, while emphasizing the new propulsion method.

The design ran into problems from the outset. The General Electric turbojet was only producing some 3,000 pounds of thrust. Design weight escalated when the airframe was beefed up after wind tunnel testing by NACA revealed longitudinal instability and stabilizer skin buckling at high speeds. The results of these tests were incorporated in the third prototype, designated XP-84A, which used a more powerful J35-GE-15 engine that gave 4,000 pounds of thrust.

The first XP-84 took to the air for the first time at Muroc Field on February 28, 1946 with Major Wallace A. "Wally" Lien in the cockpit. In August, the second prototype arrived at Muroc. Both XP-84s were powered by J35-GE-7 engines producing 3,745 pounds of thrust. Fight tests revealed a limiting speed of Mach 0.80, which was quickly reached due to the thick wing. The Air Force now requested an increase in range for use as a bomber escort. Republic answered by developing jettisonable fuel tanks carried on the wingtip. The 15 YP-84As delivered for service test had the upgraded J35-A-15 engine first used in the third prototype, and were armed with a total of six .50-caliber M2 Browning machine guns, four in the nose and one in each wing root. They could carry wingtip fuel tanks with 226 U.S. gallons each.

The production F-84B differed from the YP-84A by having faster-firing M3 guns and became operational in December 1947 with the 14th Fighter Group, based at Dow AFB outside Bangor, Maine. Within weeks, flight restrictions limiting maximum speed to Mach 0.8 due to control reversal, and maximum acceleration to 5.5 G due to fuselage skin wrinkling were issued. A shortage of parts created maintenance difficulties and the new type earned the nickname "Mechanic's Nightmare." All F-84Bs were grounded on May 24, 1948, because of structural failures. This was quickly followed by the grounding of the F-84Cs just coming off the production line.

The newly-independent Air Force considered cancellation, but the airplane was saved when the new F-84D, which entered service in early 1949, satisfactorily addressed the major faults. The wings had a thicker aluminum skin, a winterized fuel system capable of using JP-4 fuel was installed, and the F-84D was powered by the more powerful J35-A-17D engine with 5,000 pounds of thrust. Tests revealed the original wingtip fuel tanks contributed to structural failure through induced excessive wing twist during high-G maneuvers; fitting small triangular fins on the outer side of the tanks solved this. A fly-off against the F-80 revealed that the Shooting Star had a shorter takeoff roll, better low altitude climb rate and superior maneuverability, while the F-84 could carry a heavier bomb load and was faster, with better high altitude performance and greater range.

The F-84E was ordered December 29, 1948, and the first, 49-2022, flew on May 18, 1949. This was the first sub-type to completely fulfill the original specifications and resulted in a production run of 843. Powered by the same J35-A-17D used in the F-84D, the wing featured a redesigned, reinforced spar, while the fuselage was lengthened 12 inches ahead of the wings and three inches aft, which increased the fuselage fineness ratio and increased top speed while enlarging the cockpit and avionics bay, which required the canopy be ;lengthened 8 inches. The fuselage stretch allowed installation of a larger fuel tank. An A-1C gunsight with an APG-30 gunlaying radar fitted in the intake splitter plate improved gun sighting. Pylons inboard of the main gear well in the wing allowed carriage of a second pair of 230-gallon drop tanks, which increased the combat radius from 850-1,000 miles to 870-1,370 miles; alternatively, each inboard pylon could carry a maximum bomb load of 2,000 pounds, greatly increasing the aircraft's capability in the fighter-bomber role it would eventually assume in . Additionally, rocket racks which folded flush with the wing after rocket-firing reduced drag over the older fixed racks were fitted.

Despite these improvements, the F-84E's in-service rate remained below 50 percent, primarily due to engine spares shortages. Allison production rates had originally been set on an expected individual aircraft flight schedule of 25 hours per month. Actual flight hours in Korea were at least double this and thus rapidly outpaced the initial supply and Allison's ability to produce new engines.

The “plank wing” F-84 began the pilot joke that “If they built a runway that ran around the equator, Republic would design an airplane that would need every foot to get off.” Pilot lore had it that F-84s were equipped with a "sniffer" device that, upon passing takeoff speed, would search for the dirt at the end of the runway. When the “sniffer” could detect the dirt, the flight controls would come on and allow the pilot to take off. It was suggested a bag of dirt be carried in the nose gear well. Upon reaching takeoff speed, the pilot would pull a trigger that would dump the dirt under the wheels and fool the sniffer.

Thunderjet takeoff performance did leave much to be desired. During the hot Korean summer, with a full combat load, the F-84 routinely required all 10,000 ft of runway for takeoff, even using four rocket-assisted take-off (RATO) bottles, each providing 1,000 pounds of thrust for 14 seconds. In such conditions, all aircraft taking off after the lead had their visibility progressively obscured by the thick rocket exhaust smoke.

Because of its thick wing, the F-84 could quickly reach its Mach 0.82 limit at full throttle at low altitude . While the engine had not yet reached full power, exceeding the Mach limit at low altitude would result in a violent pitch-up and structural failure of the wings. The airplane could be flown faster above 15,000 ft, at the cost of severe buffeting. When engaged with the MiG-15, the speed limitation proved troublesome since the F-84 was slower than the MiG. With a maximum instantaneous turn load limitation of only 3 G, which was followed by a rapid loss of airspeed, the airplane could not turn tight enough to get away from an attacking enemy fighter. Jacob Kratt, the only F-84 pilot to score two victories in one fight, achieved his second victory by intentionally flying his F-84 into pitch-up. The pursuing MiGs were unable to follow the violent maneuver and one crashed. Luckily for Kratt, his airplane did not disintegrate but the airframe suffered such heavy warping that it was written off after he returned.

The definitive straight-wing F-84 was the F-84G which entered service in 1951. The aircraft introduced a refueling boom receptacle in the left wing as well as probes fitted to the inner side of the wingtip tanks for “probe and drogue” refueling, autopilot, Instrument Landing System, J35-A-29 engine with 5,560 lb of thrust, a distinctive framed canopy (also retrofitted to earlier types), and the ability to carry a single Mark 7 nuclear bomb. The F-84G was retired from the USAF Reserve and Air National Guard in by 1964.

THE KIT

announced their Thunderjet in early 1998, to be released through the company's ProModeler line. Unfortunately internal problems in the company resulted in the first kit - the F-84G - not being released until 2000, which allowed Tamiya to steal a march with that company's F-84G which was released in September, 1998. Both the Monogram F-84G and later F-84E kits are superior in shape accuracy and overall detail to the Tamiya F-84G kit, which is too deep in side profile, while the ventral fin is too short, and the vertical fin and rudder are off in shape. While the vertical fin shape can be modified (but not entirely corrected), the other two items are unfixable. The Monogram kit is spot-on in fuselage shape.

This particular kit had the typical poorly-printed and off-color decals associated with Monogram in is decline. I was fortunate to have the excellent Cutting Edge sheet that provided the F-84G “Night Take Off,” flown by Col. Charles Jordan, CO of the 58th Fighter-bomber Wing in July 1952, the same as provided in the kit. The sheet provided the colorful wing commander's markings and personal markings, along with the “buzz” number and serial number. I was able to source the proper dark blue “USAF” decal from an Aeromaster sheet, and used the new Fundekals US National Insignia, which is excellent.

CONSTRUCTION

I started by painting the cockpit. The instructions say to paint it Interior Green. However, looking at a color photo of the cockpit of the restored F-84E at the Air Force Museum reveals it was Dull Dark Green, the same as the P-47 cockpit. I thus used Tamiya “Black Green” which is a bit darker than Dull Dark Green, with a bit of Tamiya “NATO Green” mixed in. The instrument panel and the side panels were painted with Tamiya Semi-Gloss Black with the detail “popped out” with a white color pencil. I used Eduard photoetch US seat belts.

I assembled the nose gear well/intake splitter, painting the interior of the wheel well Yellow Zinc Chromate with Tamiya “Zinc Chromate,” a perfect match. I attached this assembly and the cockpit to the left fuselage half, then crammed some fishweighs above the gear well and below the cockpit to insure nose sitting. With careful assembly, there was only a minor centerline seam that was easily sanded off.

I assembled the wings, cutting off the inboard gear well door for later attachment after painting, and pained these gear wells YZC. I opted for the flaps-down version and assembled those for later attachment after painting.

The wings were attached then, and I left the horizontal stabilizers off for attachment after applying the large color decal to the vertical fin.

COLORS & MARKINGS

I misted on thinned Tamiya Gloss Black as the primer for the Vallejo paints. The overall airframe was painted with Vallejo Aluminum. I then hand-painted the Duraluminum panels on the forward and aft fuselage areas, and used White Aluminum for various inspection panels. The nice thing about the Vallejo Paint is you can hand paint over it with other Vallejo metallics, and there will be no brush strokes. Done this way, you do not need to mask off these areas with the potential for pulling off the very thin paint.

When it came time for decals, I started off doing the red-yellow-blue markings. This decal sheet was intended to fit the Tamiya kit, so there were some areas that were “off.” Fortunately, the Aeromaster sheet had some color panels that were the same shades as the Cutting Edge decals, and I used bits and pieces from those to “touch up” the short areas on the model. I then applied the service markings, followed by the stencils. The stencils came from the kit decals and were frankly terrible, taking a long time to come loose from their backing, and requiring Solvaset to make them sit down. I got enough of them on to simulate the stencil-intensive look of USAF fighters in the 1950s.

I assembled the landing gear and attached it, then the flaps. I unmasked the canopy and posed it in the open position.

CONCLUSIONS

The Monogram F-84s are still the best Thunderjet kits in 1/48, and can still be found on eBay at very reasonable prices. Aeromaster did a lot of decals for the F-84s and those can still be found. If you want a Thunderjet in your collection, either the Monogram (now Revell) F-84E or F-84G kits are the Thunderjets you want. Highly recommended.

Reader reactions:
9  Awesome 1 

9 additional images. Click to enlarge.


16 responses

  1. Damn fine lookin' result, TC...Monogram stuff STILL rules for the $$$ !

  2. True dat, Craig. True dat!

  3. Nice job T.C., I've built one of these and thought it was a great kit, both in detail and over all fit and alignment of parts. Didn't need to use any filler on this model. I would also recommend it to anyone wanting an F-84G in their collection. In fact I have an extra Pro-Modeler kit in my possession if anyone is interested in acquiring it.

  4. Hello Tom,
    Beautiful model, accompanied by a very interesting article.
    A lot of work, but appreciated by the reader.
    Regards, Dirk

  5. Jets aren't my cup of tea, but this is a really sharp looking F-84 Tom

  6. "Jacob Kratt, the only F-84 pilot to score two victories in one fight, achieved his second victory by intentionally flying his F-84 into pitch-up. The pursuing MiGs were unable to follow the violent maneuver and one crashed."

    John Boyd would do this maneuver with the F-100 which was built a lot stronger than the F-84. Basically, by pitching up the aircraft your turning the airframe into one big air brake. He pulled this maneuver while teaching his students.

    The Revellogram F-84 represents the Golden Age of modeling...when accuracy and price where affordable and guilt free. The one that I built had a slight warp in the fuselage and a insert in the nose that needs a little TLC and some filler, easily fixed but, if your going to do the 50's and like bright colors this is the go to kit.

    Enjoyable read and build to look at TC.

  7. Tom your Thunderjet is beautiful! And I won't gush about Monogram's version. Oddly I have one in the stash I never built. They are shape wise better than Tamiya I know, how is the fit? Looked good when I was taping them together, just never moved on to glue!

  8. Another home run... the crowd goes wild! Excellent post, Tom.

    ‘Liked’ -

  9. Beautiful Jet. Back in the day when the Wing Commanders were still active pilots and leaders in the air.

  10. fine result

  11. Great post and model as always Tom. I've got a technical question for you on the Vallejo metal finish: Once you've got the metallic paints down, how do you prep for decals, and how do you finish off? do you put down a gloss coat of some type in either case? I'm about to start experimenting with more NMF finishes, and now that I have an airbrush, I have more options than Metalizer rattle-can paint.

    • Excellent question. As described, I apply a primer coat of Tamiya Gloss Black, thinned and misted on to guarantee smoothness. I don't use Vallejo's own Gloss Black because it's too grainy under the metalizer paints and shows. the Vallejo metalizers are "airbrush ready" and don't need thinning (and you clean up with water). I mist them on and get a good solid coat of the basic color (I find the two most useful colors are "Aluminum" and "White Aluminum," followed by "Duraluminum" for darker colors). For small panels, I brush paint the appropriate color on - as I said above, the Vallejo paints are very brush-friendly and do not streak. I haven't found the need to apply any sealer coat to these paints, if the base coat is applied solidly and given a day to cure before further handling. Once the paint is fully cured, there is no problem applying decals and using a setting solution; it won't eat the paint as sometimes can happen if the paint isn't fully cured - acrylics dry to the touch quickly, but cure more slowly, deceiving the modeler that they can proceed to the next step too early. Hope this helps.

  12. The F84 pictured has tail markings assigned to 58th Fighter Bomber Wing. In late spring 1952 the 58th replaced the 136th FBW that was returned to Texas ANG on paper. The 58th streamer decorated with Korean Presidential Unit Citation. In late 1951 I was radio operator assigned to the 136th forward operating base K-2, Korea with rear maintenance at Itazuke, Japan. F-84 on display (Number FS-454), at USAF Museum, Wright-Patterson AFB has same markings with ""59th Fighter Bomber on nose gear door. [email protected].

Leave a Reply