You are visiting iModeler as a Guest. Let's hope this is only a beginning.
Join iModeler today.
"I'd say that modeling is just one half of the hobby, and iModeler is the other 50%." @richardms
Looking great, my friend @kalamazoo!
Looks very nice, Allan @kalamazoo
Thanks Spiros, ------------- Thanks John, ----------------- A coat of under side RLM 78 ? ridges of paint from the tape edge sanded, a little touch up needed !
1 attached image. Click to enlarge.
Looks nice indeed, Allan @kalamazoo
Thanks Spiros, ------------ Thanks John, ----------------- a bit of Pledge gluing !
2 attached images. Click to enlarge.
Amazing to see Pledge holding even the prop in place, my friend @kalamazoo!
Thanks for the tip, Allan @kalamazoo I was not aware that Pledge was able to do this as well.
Thanks Spiros, only the spinner ! ------------ Thanks john, 1001 uses, well not quite ! --------------- a second coat of the interior grey, XF63 on the canopy frames.
Nice work, Allan @kalamazoo
I did try to use Pledge (actually Humbrol clear), but lost patience. Will have to revisit the use of it for a vac-form canopy in progress.
@airbum, for transparant parts I use Revell contacta clear, till now it does do the job nicely.
Thanks Spiros, -------- Thanks John, I've not tried Revell ------------ Thanks Erik, vac- form canopies may benefit from a more flexible glue, PVA type ! ------ canopy frames painted, masking on, a coat of RLM79 ?, masking off.
4 attached images. Click to enlarge.
Looking super, my friend @kalamazoo! Of course I liked he "handle"! 🙂