MB 339A P.A.N. "Frecce Tricolori"

Started by Allan J Withers · 77 · 1 month ago · 1/72, Frecce Tricolori, Italeri, Italian air force, MB 339A
  • Profile Photo
    Allan J Withers said 8 months, 3 weeks ago:

    Thanks my friends, Spiros and John, ------------
    more sprue glue in the tail, it takes a while to harden.

  • Profile Photo
    Allan J Withers said 6 months, 3 weeks ago:

    Not enough test fitting done, the canopy is so thick at the rear it was hitting the seat, so shorten the seat, control stick is so thin it broke, also adding more Plasto to the back of the cockpit to match the canopy.

    1 attached image. Click to enlarge.

  • Profile Photo
    Spiros Pendedekas said 6 months, 3 weeks ago:

    An area needing its extra attention and, as always, an excellent job, my friend @kalamazoo!

  • Profile Photo
    John vd Biggelaar said 6 months, 3 weeks ago:

    A pity it didn't fit, Allan @kalamazoo
    I'm sure you will get those corrections done nicely.

  • Profile Photo
    Allan J Withers said 5 months, 1 week ago:

    Thanks my friends, Spiros and John, ------------
    the canopy now fits over the seats, but the rear instrument cover was too wide, adjusted and in, canopy on next !

    1 attached image. Click to enlarge.

  • Profile Photo
    John vd Biggelaar said 5 months, 1 week ago:

    Very nice progress, Allan @kalamazoo

  • Profile Photo
    Spiros Pendedekas said 5 months, 1 week ago:

    All looking excellent there, my friend @kalamazoo!

  • Profile Photo
    Allan J Withers said 5 months, 1 week ago:

    Thanks John and Spiros, -------
    canopy brace in place, canopy on with Pledge and PVA to fill gaps, the fuselage is out of shape at the rear of the canopy, off center !

    2 attached images. Click to enlarge.

  • Profile Photo
    Erik Gjørup said 5 months, 1 week ago:

    Looks like it is goin' to fight you all the way!

  • Profile Photo
    John vd Biggelaar said 5 months, 1 week ago:

    A pity to see the bad fitting, Allan @kalamazoo
    Could it be that the canopy is deformed, maybe some warm water will get it back in shape.

  • Profile Photo
    Spiros Pendedekas said 5 months, 1 week ago:

    Pity for the canopy, my friend @kalamazoo. Looking forward to your next steps.

  • Profile Photo
    Allan J Withers said 5 months ago:

    Thanks Erik, some do, John, fuselage, Spiros, ------------
    excess plastic scraped away and Plasto to fill the low side.

    1 attached image. Click to enlarge.

  • Profile Photo
    Spiros Pendedekas said 5 months ago:

    That should do, my friend @kalamazoo!

  • Profile Photo
    John vd Biggelaar said 5 months ago:

    Looks much better this way, Allan @kalamazoo

  • Profile Photo
    Allan J Withers said 4 months, 3 weeks ago:

    Thanks my friends, Spiros and John, --------
    a coat or so of XF1 on the canopy frames.

    1 attached image. Click to enlarge.