You are visiting iModeler as a Guest. Let's hope this is only a beginning.
Join iModeler today.
"It's the best modeling club on the planet!" @frey
Here is s means of "support", made from a clothes hanger, suitably bent...
Now that is a very practicle stand, Spiros @fiveten
Thanks my friend @johnb!
@fiveten GREAT idea!
Thanks my friend @bikequeen!
@fiveten i do something similar with bamboo skewers on large parts I use strong masking tape to hold the part. on smaller parts I use a product called “Fun Tac” a sticky putty thats holds the piece on the stick…works great. Then to dry I took an old coffee can filled it half way with rice and punched holes in the top….presto a drying stand 🙂
1 attached image. Click to enlarge.
Another wonderful idea, my friend @cricket!
Great idea, Cricket @bikequeen
Thought you might like to see my rigging stands. Made out of cardboard cartons, masking tape re-enforced and cut to fit the model. Stick it to the bench with "blue tac" and you have 2 hands free to rig your model.
3 attached images. Click to enlarge.
These are awesome ideas, my friend @michaelt! Thanks for sharing, will definitely construct similar ones!
That's a great idea for rigging, Ian @firelockg Thanks for sharing
Another thing I found ,if the model is not steady enough all you do is "blu-tac" it to the cardboard box.
Thanks my friend @firelockg! Blutak is always handy!
