Good progress, Brian @f-104nut
The seats will improve significantly.

I decided to go with the Aerocraft 3D Buccaneer seats which look way better then the kit seats . Only thing is they dont have the loaction box on the back to mount on the bulck heads . I used some plstic stock to make some , test fitted and perfect ! Now to make up my mind if I'll use the Aerocraft ejection seat pulls or the Quinta Studio set ejection pulls ? Instrument panel coaming was painted with my own Tamiya mix then drybrush with german gray . Crew ladders assembled and i added a piece pof place for extra brace . Speed brake cleaned up and assembled . I origanlly drilled out the holes for the wing mounted , Looking closely at the markings i chose this plane does not have them so i have to fill the mount holes in .

IMG_5859 by b007scott, on Flickr

IMG_5864 by b007scott, on Flickr

IMG_5866 by b007scott, on Flickr

IMG_5867 by b007scott, on Flickr

IMG_5862 by b007scott, on Flickr

IMG_5870 by b007scott, on Flickr

IMG_5870 by b007scott, on Flickr

IMG_5870 by b007scott, on Flickr

IMG_5872 by b007scott, on Flickr

Brian

Those seats are impressive, Brian @f-104nut
Lots of details, clearly an improvement over the original ones.

Busy couple of days on the Buccaneer . Installed the HUD and coaming . The Aerocraft seats was sprayed with mr surfcer 1500 primer . Once dry you can really see the amazing 3D printed detail . Bottom seat frame color was airbrushed and the black was hand painted . Next I'll start painting the cushins . I was pretty sucessful makng my Tamiya mix for the RAF light aircraft grey which was spray on the slipper fuel tanks . Once the bombs are sprayed with clear gloss il atemp to use the kit decals for the yellow band on the nose. Next to get the windsheild cleaned up and ready to glue on .

IMG_5949 by b007scott, on Flickr

IMG_5948 by b007scott, on Flickr

IMG_5932 by b007scott, on Flickr

IMG_5933 by b007scott, on Flickr

IMG_5931 by b007scott, on Flickr

IMG_5947 by b007scott, on Flickr

IMG_5945 by b007scott, on Flickr

IMG_5944 by b007scott, on Flickr

IMG_5943 by b007scott, on Flickr

IMG_5942 by b007scott, on Flickr

IMG_5941 by b007scott, on Flickr

Brian

Some very nice progress, Brian @f-104nut

Seats look really nice with lots of detail, Brian (@f-104nut). Those landing gear struts look huge.

Excellent progress, my friend @f-104nut!

Fianlly started sprasyng the mr finishin surfacer primer 1500 gray on the airframe . Once dry i look to see if any sanding or more primer is required then I'll spray the top side . Got the future bkack wash applied to various parts .

IMG_6668 by b007scott, on Flickr

IMG_6639 by b007scott, on Flickr

IMG_6638 by b007scott, on Flickr

IMG_6637 by b007scott, on Flickr

IMG_6636 by b007scott, on Flickr

IMG_6635 by b007scott, on Flickr

IMG_6634 by b007scott, on Flickr

Brian