Hi all,
The wings supplied in the kit are cast in resin and have internal metal reinforcing rods to prevent warping of the wings.
Comparing the wing shapes and detail to reference material shows that some aspects of the wings require changing to make them closer to that of the actual wings:
The wing ribs tapes are too heavily cast.
The wing trailing edges do not reflect enough the ’washout’ droop at the inboard sections of the wings.
The leading edges of the upper wing halves are of different thickness.
The top surface of the wings appear to be too ’bulged’ around the central area.
The upper wings have a degree of warp.
So to correct these will require some work,
Mike
4 attached images. Click to enlarge.
