Small bits
Before adding the next layer of grey, a few small items were added
The nose has a two-stage intake that is made up of one of the major resin parts and a small fairing to be added
-
1. nice small intake in the intake
I had decided to leave it for the first layer of paint, and had to install it now, before the next visit at the paintshop.
Also the oilcooler needed some attention
It has a strengthening rod in resin that lost out to the monster, and a small piece of conduit was drafted for the job
The exit is very small and also had to be added now
-
1. ouch - need to be better here next time around. . .
2. sanding error
This is of course to avoid too thick paint on the opening.
As can seen in the previous picture, I accidently sanded one of the covers for the wingbolts flat
-
1. LqS to the rescue
2. amazing detail in both donor and resin kits everywhere - very nice!
And that was reshaped with some LqS
And with that it is now ready for the next visit to the painters – next post may be with decals, unless it will be with more parts added. You have to stay tuned to find out!
