@gblair it really is amazing how satisfying the sanding process is.
@fiveten – do open a 109
@johnb as you can imagine from all the scotch corks the dust has been washed away
@lis, thanks
@j-healy, I agree – these “Versuchs” planes are something else.
@skyraider3d, panellines are always something to think about. Try enlarging them to scale – that would be massive. At least I am very happy to fill these, not least as they were filled back then on the real stuff.

Taking a brake

- in more than one sense!

Having been away from the bench for far to long, and then just a short dry-fit break on this one after some sanding

I did some sanding last time, and had to dry-fit to check where to continue

next up it may be time for some interior. That will be a challenge as I really haven’t seen any pictures of the cockpit on this one!

Nice to see progress on the V14 as well, Erik @airbum

Erik, @airbum
It is nice to see you are back and working on these 109's. I think I can talk for all of us by saying we missed your regular updates and good humor with the words of wit and wisdom you always include with your posts.

It looks like you have most, if not all of the seams filled in nicely with your Udet V-14 model. Keep it going. 🙂

Gents, @fiveten, @johnb, @gblair, @lgardner and @lis time to continue!

Internals getting attention

The cockpit got some TLC in preparation for closing the fuselage

Apart from seatbelts it is ready to get the fuselage closed. I still haven’t got a good picture – or any picture for that matter – of the interior and seatbelts, so all is a guess. I suppose it had the modern stick and not the spadegrip as that was obviously already in late Doras. The anchor points for the seatbelt may have been on the rear wall as in wingsy’s E-1.

I suppose this one had the breathing apparatus installed as it was to fly in the alps for the meeting in Zürich.

next up the fuselage will most likely be assembled

Indeed it does @fiveten. I may have a spare "Atemgerät" I can send you - just email me when/if you need one.

Indeed a very detailed interior, Erik @airbum
You might add some navigation papers in that paper holder.

No problem @fiveten – spares are to be used.
I will do that @johnb – a few 1930’s maps and stuff will be sourced.
@lgardner, thank you for the kind words. Your build will commence when it is ready for it, and that will be something to look forward to. I have been asking around, and one AM supplier has told me he actually has the rough mould ready for a conversion, but he seems unable to find his resin-mojo right now. Fingers crossed for a new AM product to replace the one long out of production.

Major assembly done

As I usually work on this at the same time as the V-13 in “golden age of airracing”, it was time to assemble the major parts

A strip of tape to minimize gap and keep the shape

And the office

Tune in for more progress later