Many thanks John @johnb, I appreciate!

Thank you very much George @gblair. Actually this is really nothing this AB story, I'm very, very, very pleased with this kit.

Looking beautiful, my friend @yann!
The intake is nicely rendered by Kineti, and you did a super job putting it together.
Wings are very well assembled, too!

Indeed nicely detailed, Yann @yann
Incredible they make this mistake when creating the manual.

Hello John @johnb, thanks a lot for your comment. No trouble at all with this error. I just swap the 2 pieces and the trick was done. The only thing was that I didn't know anymore where was the left and the right to install the turbo fan. After few trials I succeed to glue it (I think) in the proper place.

Hi Folks! The progress of the week: Wings have attached to upper fuselage.

The probe on the tail have been cut off

And the nose parts assembled and ballasted with 2 x 4gr of led + 1 x 4gr on the front of the IP. This was not mention in the manual. I just wanted to avoid any surprise and he will stand on his gear.

I struggle a bit with the wings. Actually the junctions of the wings to the front landing gear well were too long. It took time before I realized the trouble was coming from this area. After grinding those part I got a good fit.

Once the the nose is in position I will have to apply some filler. I'm not sure it is necessary for the full kit's seems but at least for the front gear bay and maybe the nose.

Great progress, my friend @yann!
Nevertheless modern, a number of Kinetic kits. like this one, do require some filling and sanding.