- iModeler

Workbench Ocupants.

Started by Allan J Withers · 144 ≡ · ↻ 2 years ago · 1/72, RAAF

Viewing 121 - 135 of 144 posts

Jump to latest post

Erik Gjørup said 2 years, 10 months ago:

Great stuff as always - some major mod's on the prince will see it come out in the expected shape.
Allan J Withers said 2 years, 10 months ago:
Thanks Spiros, -------------
Thanks John, -----------------
Thanks Erik, ---------------------
Prince --------- too much sprue glue softens the plastic and it shrinks, more patience needed ! some ribbing restored and modified on the rudder.
Vengeance ---------- some interior green in the undercarriage bays !
4 attached images. Click to enlarge.
1. softened and shrunk.
1. tape to do ribbing.
1. painted ribbing.
1. interior green.
John vd Biggelaar said 2 years, 10 months ago:

That is a nice trick to visualize the ribbs, Allan @kalamazoo
Spiros Pendedekas said 2 years, 10 months ago:

Yep, I know the sprue glue shrinking, my friend @kalamazoo!
Nice ribbing technique!
Great look of the interior green at the gear doors and bays!
Erik Gjørup said 2 years, 10 months ago:

impressive ribbing!
Allan J Withers said 2 years, 10 months ago:
Thanks John, ------------
Thanks Spiros, -----------------
Thanks Erik, -------------------------
Vengeance ---------- tail wheel door painted again, another coat of interior green on the canopy frames.
Prince ----------- an air brushed coat of RAF interior green on the cockpit ceiling.
3 attached images. Click to enlarge.
1. tail wheel door.

2. Vega Gull prop'.

3. other prop' blades, 3 of 8.
1. second coat of interior green.

2. tail wheel door.
1. a sprayed coat of interior green.
John vd Biggelaar said 2 years, 10 months ago:

Those propellor blades are masked very well, Allan @kalamzoo
Nice progress on both.
Spiros Pendedekas said 2 years, 10 months ago:

Great progress on those beauties, my friend @kalamazoo!
Erik Gjørup said 2 years, 10 months ago:

I suppose the interior green on the prince qualifies as a heavenly green? (sorry - it is still early here) but that bad joke aside, nice progress! I am always impressed with your frame paintings and the later cleanup resulting in nice and sharp canopies.
Allan J Withers said 2 years, 10 months ago:
Thanks John, ------------
Thanks Spiros, ---------------
Thanks Erik, it would be from the inside, -------------------
Vega Gull ---------- a first coat of red, maroon, Humbrol 20, some rubbish to sand out and I should have primed it.
C 27J ----------- some painting done previously, no progress for a while till now, elevators glued to tail planes and these fitted to the fuselage.
3 attached images. Click to enlarge.
1. first coat of red, needs sanding and more paint.
1. C 27J, posted earlier.
1. tabs trimmed, elevators glued.
Spiros Pendedekas said 2 years, 10 months ago:

Nice jobs on both, my friend @kalamazoo!
Very interesting subjects!
John vd Biggelaar said 2 years, 10 months ago:

Nice progress, Allan @kalamazoo
Allan J Withers said 2 years, 10 months ago:
Thanks Spiros, will you be doing a HAF C 27J ? --------------
Thanks John, ---------------
C 27J ---------- Italeri got it wrong, they were nice enough to send me some C 130J blades in exchange for some money !
Vengeance ---------- first coat of colour on the canopy frames and the tires painted.
3 attached images. Click to enlarge.
1. correcting the wrong way twist of the blades.
1. covers on the ceiling hatches.
1. tires painted.

2. first coat of colour on the frames.
Spiros Pendedekas said 2 years, 10 months ago:

All looking great, my friend @kalamazoo!
Yes, a Greek C-27 is in my to do list, someday! Thanks for the blades info!
John vd Biggelaar said 2 years, 10 months ago:

Steady progress, Allan @kalamazoo
Nice support from Italeri.

Viewing 121 - 135 of 144 posts

Work in Progress – Aircraft

Workbench Ocupants.