Messerschmitt Bf 109 F-4, Spanish AF, Zvezda 1/48

Started by Erik Gjørup · 101 · 2 years ago · 1/48, airbum, Bf109, Friedrich, halfworks, Messerschmitt, Morón, quarterscale, Spain, Spanish AF, WWII
  • Profile Photo
    George R Blair Jr said 4 years, 1 month ago:

    I am always amazed at how well a coat of primer pulls everything together. Looks great, Erik (@airbum).

  • Profile Photo
    John vd Biggelaar said 4 years, 1 month ago:

    Primer is always a great base.
    I personally keep my primer also on the thin side.

  • Profile Photo
    Erik Gjørup said 4 years, 1 month ago:

    Thank you all for comments and info

    @fiveten, Alan Parsons Project is always a good idea 🙂
    @gblair, dont it just make the thing look like something with the primer on.
    @JohnB, it is - and will be for my future builds I think - done a few without it, but as George said it pulls everything together - and you can correct a few flaws before adding paint. I shall be making mine very thin in the future too - just such a lot easier to spray and to clean the brush after use.

  • Profile Photo
    Erik Gjørup said 4 years ago:

    Farbton 65

    With the primer dry it is time to get some color

    And as usual it is the belly that gets it first. It is to be Farbton 65, lichtblau.



    A lot of tape and gum has been used beforehand-

    Many small parts needs the color as well



    It got two layers thinned xtracolor X202 over two days, and that seems to hold up nicely

    now it has to dry for some days before the first of the three upper colors can be airbrushed

  • Profile Photo
    Spiros Pendedekas said 4 years ago:

    It's such a nice feeling to know that your well done paintjob is drying!
    Great result and lovely 65 shade, my friend @airbum!

  • Profile Photo
    John vd Biggelaar said 4 years ago:

    You can never have enough of 65 paint when doing German aircraft.
    Looking great, Erik.

  • Profile Photo
    Erik Gjørup said 4 years ago:

    Spiros (@fiveten), paint drying, always a pleasure.
    John (@JohnB), right! - just got another batch of the stuff the other day.

  • Profile Photo
    George R Blair Jr said 4 years ago:

    It is always a nice feeling to see that first color go on the plane, Erik (@airbum). You get a sense of satisfaction that everything will wrap up nicely. By the way, Alan Parson's Project gets my vote, too.

  • Profile Photo
    Erik Gjørup said 4 years ago:

    Indeed it is George. one more update comin up soon.

  • Profile Photo
    Erik Gjørup said 4 years ago:

    nope - still no luck with picture uploads, so it'll have to wait a bit, sorry.

  • Profile Photo
    Louis Gardner said 4 years ago:

    Erik, @airbum
    I have had problems with posting pictures too... Hopefully this will be fixed soon.

    I like how the RLM 65 looks on your 109 !

  • Profile Photo
    Pedro L. Rocha said 4 years ago:

    Going well Erik!
    I’ve built this kit and liked it very much, so much that once Zvezda launched their G-6 I immediately bought also. That one I posted here at iModeler, but the F-2 I did not. Perhaps one day.
    Following the paint part keenly because it’s the best part of any build 😉

  • Profile Photo
    Erik Gjørup said 4 years ago:

    Masking for the weekend

    With the 65 dry it is time to prepare for some more paint in the coming weekend

    Rather low demarcation line – and the lower cowling has to be masked and painted seperately



    During masking I discovered a nasty sinkmark.

    It seems to be a problem with the Zvezda and Tamiya Thin?


    Well, some LqS and ready for sanding in a few days

    - and then it will be time for the next color – farbton 63 I think it will be

  • Profile Photo
    Erik Gjørup said 4 years ago:

    By the way - thanx to the iModeler team for getting the site going that fast again. And not only is it working, it is working very well again - thank you people!

  • Profile Photo
    Spiros Pendedekas said 4 years ago:

    AMS (and, more specifically 109 AMS!) will not allow you {b]not[/b] to work on your 109s, no matter how hard your job schedule might be, my friend @airbum!

    Masking is looking great!

    About the sink mark, it might be that the Zvezda styrene is on the "sensitive" side, but, it might also be that an amount liquid glue had stagnated under the mark, for whatever reason (a combination of the two seems believable...).

    But, since we do have LqS now, what do we have to fear?!

    Waiting for your 63!