Hello colleagues,
this time I would like to share with you about my elaborate building F-35I by Italeri 1/32
I have a complete etch set from Eduard for the kit. I made the cables in the chassis shafts and bomb bays of lead wires of [...]
Hello colleagues modellers
Today I will share with you this legendary 332nd FG Marking Machine piloted by Lt. Robert W. Williams
The model from Tamiya is absolutely trouble-free. I used only a few etchings from Eduard to the cockpit to [...]
Hello colleagues,
I would like to share with you this Tigrated Dolphin from the Air Force of the Czech Republic.
Kit from AMK supplemented with Eduard etchings.
Tigrated camouflage I sprayed the masks of my own production.
Perhaps you will [...]
Hello colleagues,
At the same time with the T-90MS, I built the T-80B from the same manufacturer. I did not use any additions to the construction.
Washer is a Tamiya stained gypsum casting and Abteilung oil paint
Hello colleagues,
I tried to build a small technique. Modelcollect kits are great and I enjoyed the construction. I did not use any additions to the construction. The spraying is done as a freehand without the use of a masking tape.
Washer [...]
Another of my collections is this model from Eduard.
Thanks to the extensive range of accessories included in the box, I did not even care.
The construction was quiet, only suction channels needed to go dry enough.
I had a problem with [...]
I tried to build some technique. I chose an icon in the world of tanks.
Mark IV male.
Building purely out of the box, complemented by some little things I found at home. Gypsum casting washer + wood plank, barbed wire is made of etched set [...]
This Mig model is supposed to be an older idle machine somewhere on the edge of the airport somewhere in Russia.
The model is without accessories and I built it as a test of metallic colors and riveting.
I'd like to share with you a little tutorial on how to paint nozzles on modern aircraft.
For the show, I chose the Aires nozzles for the F-15E 1/48
Step 1 - Mr.Surfacer 1000 (1500)
Step 2 - Glossy Black Tamiya X-1
Step 3 - Ring - Alclad [...]
This time I'll add the smaller Viper from Tamiya.
The machine is marketed by the National Guard of the State of Arkansas.
The kit was supplemented with the brake shields and RBF flags from Eduard and the Plusmodel ladder.