14 articles · 1.7K karma · 11 friends · active 10 months ago
I live in Sweden and I got back to the hobby when I turned 50 and got a model-kit as a present from my kids. After that things escalated quite quickly and I soon got a man-cave with a workbench, spraybooth and an ever growing stash
My favorite subjects are aircrafts from the Cold War era, but I occasionally build WWII aircrafts. As a casual World of Tanks player I sometimes also find myself building AFVs.
Find me on Youtube:
https://www.youtube.com/c/KillBoxScalemodelling
This was a quick build that went quite smooth - these Revell kits are really nice and go together without too much issues. I decided to build it gear-up so I had to make two "figures" (in this scale they are really only two tiny [...]
This build have been a WIP for nearly 9 months, going back and forth between the workbench and a storagebox. I had an idea to build a superdetailed SHAR with a lots of aftermarket, 3d printed parts and scratchbuilding. But due to poor [...]
This was supposed to be a quick build to restore mojo and get something finished off my bench.
It turned out that the tooling is from 1969 so there were quite some work to complete the build of this bird... The kit is from 2001 with [...]
This build is a couple of years old - it was actually the first 1/35 scale AFV that I built after coming back to the hobby. After studying reference photos and talking to people who did their military service in this vehicle I soon [...]
This kit was a very pleasant surprise... The first kit from a small manufacturer normally sets off all the warning-alarms for me, but this was the "Expert set" boxing with photoetch, painting mask set and technical stencils [...]
This is a 3D print of a Mondoshawan from the movie The 5th Element, directed by Luc Besson.
The 3D model was resized to fit the buildplate of my Anycubic Photon and it took approx. 12 hours in total to print all the parts. The Water [...]
Here is my SAAB JA37 Viggen; my most recent build that have involved some aftermarket, lot's of scratch-built details and also some 3D printed parts. The build took 4 months and is by far the most complex build I have done sofar in my [...]
Here's my latest finished build. The build went together quite well, with the exception of the rear part of the fuselage that caused a lot of extra work... It was painted with Gunze Aqueous acrylic paints and the weathering was done with [...]
This is my latest build; the Academy 1/72 ADF where I have added an Eduard zoom-kit and the Aires resin exhausts. The resin sidewalls of the latter fitted really badly so I decided to scratchbuild the walls out of styrene sheet [...]
I built this kit as a buddy-build on YouTube and I was surprised about the quality and engineering performed by Zvezda. It's not far behind the top players in 1/72 aircraft (Tamiya, Eduard, Trumpeter et al.). Decals behaved well and the [...]
