This project started with the Revell 1:144 Saturn 5 rocket kit, however I wanted to do something a bit different with it.
Project Orion was a spacecraft concept that the USA seriously considered in the late 1950s and early 60’s. The [...]
This build have been a WIP for nearly 9 months, going back and forth between the workbench and a storagebox. I had an idea to build a superdetailed SHAR with a lots of aftermarket, 3d printed parts and scratchbuilding. But due to poor [...]
This brings us to the end of building this 1/24 scale P-51D conversion to the P-51B model.
I recall drawing the name of "SLEEPYTIMEGAL" on a piece of artist "Frisket" film, then cutting the name out and then applying [...]
This is the Monogram kit from 1968 in 1/72 scale. Even though it is over fifty years old the kit still compares well to recent releases, featuring some very nice surface detail and clever engineering which ensures correct alignment and [...]
An aircraft as iconic as the Bf 108 is matched by an equally iconic colour scheme: the blue "RLM 24" and the classic forms of Messerschmitt's groundbreaking first all-metal aircraft form a combination that is still memorable [...]
The P-43 Lancer was the final result of the work of one of the most visionary figures in aviation, Alexander P. deSeversky. A pilot in the Imperial Russian Naval Air Service during World War I, Seversky first came to the United States in [...]
'If one gun pod is good, three are better'. Primarily flying ground support missions, It was decided to sling three 20mm gun pods under their F-4's. Being that F-4B/J's could only carry the pod under the center line station, being Marines [...]
I wanted to build a 1/48 scale tank and I chose a Churchill Crocodile for the project. I also wanted to see if I can hand paint small letters so I decided to put Fury on the barrel. The accessories are from miniart.
The inspiration for this project was the photo of torpedoes being loaded onto Helldivers of VB-2 on the U.S.S. Hornet. The aircraft in the photo is the SB2C-1C version of the Helldiver, and since I had a Pro-Modeler SB2C-4 kit that I had [...]
Making a wooden mold was easy to make, so I could "vac-u-form" my windscreen, canopy and half-round side windows. As a child of around 6 year old, we neighborhood boys all had "pen-knives" and use to sit around an [...]